Shandong Xinkaite Bearing Co.,Ltd.
Unified Social Credit Code: 9137 1525MA3C 5428XP
Production Department
Address: Xu Village Industrial Garden, Gan Town, Guan County, Shandong
Tel: +86 635 5638235
Fax: +86 635 5638808
Mobile: +86 15563545668
Service Hotline: 4000 305204 Sales Department
Address: 314 Puli Mansion, Beixiaoxinzhuang West Street, Jinan City, Shandong
Tel: +86 15688862750
Fax: +86 531 87901699
WhatsApp: +86 15688862750
Skype: live:XinKaite
Email: xkte@xinkaite.com
Conveyor idler looks at the best process
Clicks:3829 Date:1-4
As one of the main bearing parts of mechanical equipment, in the end device in the future, we must pay attention to see step by step, so as to ensure the safety of use of bearings, following Beijing Sunny-Dragon Tejing Bearing Co. Ltd for Conveyor idler view on the best process. The Conveyor idler should clean the bearing surface view before and then carefully check the bearing oil seal and its surrounding parts, if have shown poor performance, must be replaced, bad seal will cause damage, the angle of touch cloud ball bearing abnormal formation equipment downtime. When looking at Conveyor idler, do not let the bearings be exposed to contaminants or moisture. If the operation is discontinued, the machine should be covered with oil paper or plastic sheet or similar data. If it is possible to clean the unconcealment bearings without disassembling and performing the view, it should be cleaned with oil brushes coated with brushes, then dry or compressed with compressed air. A probe used in a small mirror and a similar dentist to see the track surface of the bearing, the stick and the beads. A bearing that does not clean the encrypt cover or dustproof; only scrubbing its external appearance. If the bearing is damaged, it needs to be replaced. It is much more economical to replace the angular touch ball bearings in a period of regular shutdown than the loss of sudden outage due to the damage of the array. The smooth agent is very important not only for bearings, but also for all bearings. But please note that the bearing should not be added too much smooth fat. Then it is the smooth agent to replace the bearing. The use of oil slick touch angle ball bearing in addition to the old oil and, if possible, should be poured into the fresh oil and let the machine in low speed rotation minutes. Try to collect the residual contaminants as much as possible and then remove the oil. When using slippery slippery bearings to replace skid grease, the applied Joe eliminator should prevent any part of the bearing with a cotton substance. Because the residual fiber may wedge between scroll and formation damage, using special bearing more attention to this question. Bearing life is and production, installation, use are closely related, must in each link to do, to make non-standard bearings in the best operation condition, thus extending the angle of ball bearing using his touch.
